| Last Modified: 11-29-2007 | 1.6 G | |
| Service Category: Vehicle Exterior | Section: Window/Glass | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000001DMD00VX |
| Title: WINDOW / GLASS: POWER WINDOW MASTER SWITCH: INSPECTION (2008 Sequoia) | ||
INSPECTION
1. INSPECT POWER WINDOW MASTER SWITCH
(a) Check the resistance.
(1) Measure the resistance according to the value(s) in the table below.
HINT:
Window motors other than the driver MANUAL and rear seat window motors use LIN communication, and therefore this inspection cannot be performed for those windows.
Standard Resistance:
Driver Switch
|
Tester Connection |
Window Lock Switch Condition |
Power Window Switch Condition |
Specified Condition |
|---|---|---|---|
|
1 (E) - 4 (UP) 5 (DOWN) - 13 (B) |
Always (ON/OFF) |
UP |
Below 1 Ω |
|
4 (UP) - 13 (B) 5 (DOWN) - 13 (B) |
Always (ON/OFF) |
OFF |
Below 1 Ω |
|
1 (E) - 5 (DOWN) 4 (UP) - 13 (B) |
Always (ON/OFF) |
DOWN MANUAL |
Below 1 Ω |
If the result is not as specified, replace the power window master switch.
Standard Resistance:
Rear LH Side Switch
|
Tester Connection |
Window Lock Switch Condition |
Power Window Switch Condition |
Specified Condition |
|---|---|---|---|
|
13 (B) - 12 (U) 1 (E) - 15 (D) |
OFF |
UP |
Below 1 Ω |
|
1 (E) - 12 (U) 1 (E) - 15 (D) |
OFF |
OFF |
Below 1 Ω |
|
13 (B) - 15 (D) 1 (E) - 12 (U) |
OFF |
DOWN |
Below 1 Ω |
|
13 (B) - 12 (U) |
ON |
UP |
Below 1 Ω |
|
1 (E) - 15 (D) |
ON |
UP |
10 kΩ or higher |
|
12 (U) - 15 (D) |
ON |
OFF |
Below 1 Ω |
|
13 (B) - 15 (D) |
ON |
DOWN |
Below 1 Ω |
|
1 (E) - 12 (U) |
ON |
DOWN |
10 kΩ or higher |
If the result is not as specified, replace the power window master switch.
Standard Resistance:
Rear RH Side Switch
|
Tester Connection |
Window Lock Switch Condition |
Power Window Switch Condition |
Specified Condition |
|---|---|---|---|
|
13 (B) - 10 (U) 1 (E) - 16 (D) |
OFF |
UP |
Below 1 Ω |
|
1 (E) - 10 (U) 1 (E) - 16 (D) |
OFF |
OFF |
Below 1 Ω |
|
13 (B) - 16 (D) 1 (E) - 10 (U) |
OFF |
DOWN |
Below 1 Ω |
|
13 (B) - 10 (U) |
ON |
UP |
Below 1 Ω |
|
1 (E) - 16 (D) |
ON |
UP |
10 kΩ or higher |
|
10 (U) - 16 (D) |
ON |
OFF |
Below 1 Ω |
|
13 (B) - 16 (D) |
ON |
DOWN |
Below 1 Ω |
|
1 (E) - 10 (U) |
ON |
DOWN |
10 kΩ or higher |
If the result is not as specified, replace the power window master switch.
(b) Check the illumination operation.
(1) Apply battery voltage to the power window master switch and check that the illumination comes on.
OK:
|
Measurement Condition |
Specified Condition |
|---|---|
|
Battery positive (+) → Terminal 8 (LED) Battery negative (-) → Terminal 1 (E) |
Illumination comes on |
If the result is not as specified, replace the power window master switch.
|
|